8 Best Fishing Rod Holders 2021

0
282

Staff, Courtesy of Brocraft

As someone who has broken multiple fishing rods by just virtue of tossing them into my vehicle, I can strongly advocate for a good fishing rod holder for your car or truck. Fishing rods are meant to bend, not break, but it doesn’t take much to damage their delicate parts, tangle line, or snag hooks.

A good vehicle-mounted rod holder keeps your fishing rod protected and separate from doors, tailgates, toolboxes, and everything else that can conspire to do damage to your precious and pricey fishing rod.

Type of Rod Holders

Most vehicle-mounted rod holders are one of two types: an enclosed case or an open rack (usually secured with some kind of strap or clamp).

Enclosed Cases

These hard cases offer the best protection for your rods and are often internally padded, with separate compartments for each rod. The downside is that enclosed cases are usually significantly more expensive than simpler, open racks and thus are typically reserved for more serious anglers willing to spend to maximally protect their rods.

Open Racks

This type of rack comes in many different configurations and styles, and offers a way to keep rods out of harm’s way without the cost that comes with a hard case. The primary downside of an open rack is that, depending where it’s mounted, it can expose your fishing rods to weather—or to each other, as they could bump together during transit. However, as you’ll see in our picks below, open racks are available with a variety of mounting locations and types, including a couple that fit inside your vehicle.

Mounting System

Many of our picks below utilize a universal mount, but if you already have a roof rack of some kind, you’ll want to shop with your preferred mount in mind. Racks from brands such as Yakima and Thule can work with most universal mounts, but if you have a rack that uses a particular type of accessory mount such as a C-channel, T-channel, or other, it may be better to shop for a rod holder that’s designed to work with your rack’s system.

Marty Williams, owner of trailer, cargo, and rack system dealer Let’s Go Aero, says rod holder shoppers should start by determining what rack system, if any, they have in place. Truck and SUV owners are most likely to already have a mounting system on their vehicle. “If the customer has an SUV, a typical roof bar system is the best choice for a rod holder. If the customer has a pickup, then the choice comes down to either a full overhead ladder rack or a clamp/channel mount system such as a Nelson,” says Williams.

Related Content: Best Fishing Rods, Best Fly-Fishing Gear, Best Spinning Reels, Best Waders for Fishing, Best Fishing Tackle Boxes

He says trucks mostly fall into two categories: domestic trucks that usually don’t have a built-in truck-bed mounting system and import truck brands such as Toyota and Nissan, which usually come with a rail system built to accept different rack/mounting accessories. Trucks with a topper can accept a roof rack system and operate more like an SUV.

If you keep your truck bed open, you can use a variety of mounting systems to add a rod holder without needing a topper or overhead rack. Let’s Go Aero’s Nelson mounting systems mount either to the bed directly with a clamp or via the truck’s built-in mounting channel.

How We Selected

My selections here were based on conversations with fishing outfitters, vehicle accessory dealer Let’s Go Aero, and my years of experience fishing across the U.S. I grew up fishing mostly bass in New York’s Finger Lakes region, shorecasted and spearfished for saltwater species while living in Hawaii, and now I fish almost exclusively for trout in Colorado’s Rocky Mountains. When hiking to fish, I use a hard case that straps to my backpack and when driving to fish, I use a hard case mounted inside my truck topper.

We focused our selections on the most common options in North America that anglers will find stocked online, in fishing-specific retailers, and in the more popular big-box stores. Our category picks offer guidance if you’ve already narrowed down your search.

Best All-Around

RiverSmith 2-Banger Rooftop Fly Rod Holder

RiverSmith
amazon.com

$429.99

Key Specs
• Mount Style:
Roof rack mount
• Capacity:
2 rods
• Weight:
21.7 lb.

As the name suggests, this simple aluminum hard case holds two fly rods. The streamlined form factor leaves room on your rack to haul gear for your other passions, such as skiing or cycling. While two slots might not be enough for a fly-fishing guide, it’s great for a solo angler with a couple rod options or for you and a fishing buddy.

Conveniently, the case has one door with one lock, but separate internal compartments keep the rods from bumping each other in transit. Note that the locking mechanism is a sold-separate add-on.

  • Keeps rods separate and protected from weather
  • Pricey
  • Locking mechanism not included

Best Budget

Hosmide Car Fishing Rod Holder

Hosmide
amazon.com

$13.99

Key Specs
• Mount Style:
Interior
• Capacity:
5 rods
• Weight:
Not listed

It doesn’t get any cheaper or simpler than this nylon two-strap solution that stretches between grab handles on your vehicle’s interior. For less than $20 you get a system that’s easy to deploy and take down, and while it doesn’t offer the protection of a hard case mounted outside your vehicle, it also doesn’t require a roof rack.

Keep in mind that it does require two rows of seating, and both rows need to have grab handles, so this won’t work for many trucks. But for sedans that aren’t easily adapted to a roof rack, this is a super-affordable solution that’s still way better than simply tossing your rods into the trunk or between seats.

  • Affordable
  • Easy up and down
  • Rods exposed
  • Works only with vehicles that have two-row seating

Best for Trucks

Brocraft Aluminum Clamp-on Rod Holder

Key Specs
• Mount Style: 
Clamps to truck bed rim
• Capacity:
4 rods
• Weight:
3.17 lb.

If you keep your truck bed open and don’t already have a mounting system, there’s a strong temptation to toss your rods in back, but I can speak from experience in saying that’s a great way to ruin them, even if you have a case.

This fishing rod holder combines with a universal clamp mounting system for an all-in-one solution. It’s simple to attach and remove and is an affordable option for people not ready to commit to a large rack system that stays on their truck all fishing season. The rods are exposed, secured with a bungee system, but the rack can orient horizontally or vertically to keep them up out of the bed and out of harm’s way.

  • Affordable
  • Easy to attach and remove
  • Rods are exposed to elements

Best Multipurpose

Yakima ReelDeal Fishing Rod Mount

Yakima
amazon.com

$179.00

Key Specs
• Mount Style:
Roof rack
• Capacity:
8 rods
• Weight:
7.85 lb.

If you swap fishing for snowboarding in the winter, this rack can easily double as a ski/board rack. The design is the same as other popular snow-sports racks except this rack comes with extra padding for the rods, which certainly won’t hurt your skis.

The clamp-down design is a proven system for a variety of gear and comes with a simple turnkey locking mechanism for security when leaving your rods in the rack. The tool-free mounting hardware is designed to be relatively universal for a wide range of roof-rack styles, and the limited lifetime warranty means your modest investment should cover you year-round for years. 

If you use a Front Runner Slimline II rack or other rack that uses T-channel mounts, Front Runner’s Pro Ski Snowboard and Fishing Rack offers the same locking alligator clamp functionality with more mounting options.

  • High-capacity
  • Doubles as snow-sports carrier

Best for Guides and Families

Thule Rodvault Fly Fishing Rod Carrier

Key Specs
• Mount Style:
Roof rack
• Capacity:
4 rods 
• Weight:
51 lb.

This popular rooftop hard case was originally produced by Denver Outfitters and became so popular with serious anglers that rack company Thule acquired it and has continued the tradition. A hard case, made up of individual aluminum tubes, holds up to four rods and has a nylon case to protect your reels.

For added security, the nylon reel case locks. The rod holder itself doesn’t, but it does screw into your rack, making it difficult for tempting thieves to quickly remove it, and with a simple cable lock or padlock (not included), you can lock the holder to your rack. The rack uses a universal mounting system, but you need crossbars to mount the holder.

  • Rods protected from elements and each other
  • Holder has locking mechanism
  • Expensive
  • Not easy to put on/take off (which can also be a good thing)

Best for Sudans

Sumo Car-Top Suction Cup Rod Rack

Key Specs
• Mount Style:
Suction or magnet
• Capacity:
4 rods
• Weight:
Not listed

It’s easy to mount a rod case if you’ve already got a compatible roof-rack system, but for many vehicles, sedans especially, it’s not so straightforward. This suction-mount option, distributed (but not manufactured) by Orvis is a clever way to keep your rods out of your car’s interior–where it’s easy for them to get bumped and catch on things—without going all-in and adding a roof-rack system. 

There are two mounting options for the Sumo: suction cup and magnetic. The two mounts are also adjustable and can be secured anywhere on the vehicle (only the suction mount offers the option to use the windshield), making it an adaptable option for different vehicle and rod combinations.

  • Easy on and off
  • Cheaper than installing a rack system
  • No locking mechanism
  • Rods exposed to weather

Ultimate Rod Case Salt Water Rod Holder

Ultimate Rod Case
ultimaterodcase.com

$799.00

Key Specs
• Mount Style:
Roof rack
• Capacity:
4 rods
• Weight:
50 lb.

Ultimate Rod Cases are made in Colorado Springs, Colorado, by a family-run company far from any oceans, but it makes an ultra-protective made-to-order rod case that’s great for saltwater reels up to 11 feet long. Store up to four rods inside the aluminum and stainless-steel box with individual protective sleeves inside for each rod.

The diamond-plate metal exterior has a rugged industrial look and for an extra charge can be custom powder coated in many different color options to match your vehicle. The mounting system is aimed to be universal and work with most crossbar- or ladder-rack style roof racks.

  • Double protection with internal sleeves
  • Rugged, rust-free build

Best Headrest Mount

Littlemole Vehicle Fishing Rod Holder

Littlemole
amazon.com

$69.99

Key Specs
• Mount Style:
Interior
• Capacity:
4 rods
• Weight:
Not listed

This creative option for anglers without a roof rack uses something every vehicle has: headrests. Plenty of fishermen have laid rods along the center console between seats, but this simple rack keeps them elevated and less likely to be damaged by other gear or passengers.

This is definitely a budget solution, and the rack lacks any kind of bungee or clamp to hold rods in place, so it might not be ideal if you travel rough 4×4 roads to get to your fishing spot. However, for the price, it’s an easy-on, easy-off solution that doesn’t require any extra hardware. Note that this rack mounts to pole-style headrests only, so make sure to check your headrests against Littlemole’s diagram in the product photos before ordering.

  • Affordable
  • No rack or mounting hardware needed
  • No mechanism to secure rods

This content is created and maintained by a third party, and imported onto this page to help users provide their email addresses. You may be able to find more information about this and similar content at piano.io

Credit: Source link